Ortur Master 3 Plywood Settings (Cut & Engrave)
19 sourced settings for plywood on the Ortur Master 3 (10W diode), thickness 2, 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| 3mm Baltic Birch Plywood | — | cut | 100.0% | 5.83 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 5.0 mm/s | 4 | — | Community source |
| Plywood | — | cut | 100.0% | 10.0 mm/s | 2 | — | Community source |
| Plywood | — | cut | 100.0% | 8.3 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 5.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 1.7 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 1.7 mm/s | 8 | — | Community source |
| Plywood | — | cut | 100.0% | 16.7 mm/s | 3 | — | Community source |
| 2mm Basswood Plywood | 2.0 mm | cut | 100.0% | 33.3 mm/s | 2 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 100.0% | 5.8 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 100.0% | 3.3 mm/s | 3 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 92.0% | 5.0 mm/s | 2 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 90.0% | 5.8 mm/s | 2 | — | Community source |
| 6mm Basswood Plywood | 6.0 mm | cut | 95.0% | 2.5 mm/s | 3 | — | Community source |
| Plywood | — | engrave | 65.0% | 50.0 mm/s | 1 | — | Community source |
| Plywood | — | engrave | 100.0% | 250.0 mm/s | 1 | 0.1 mm | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 60.0% | 33.3 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 40.0% | 100.0 mm/s | 1 | 0.1 mm | Community source |
| 6mm Basswood Plywood | 6.0 mm | engrave | 45.0% | 33.3 mm/s | 1 | — | Community source |
Sponsored · Ad space available