Sculpfun C1 3W Laser Settings
3W diode · 6 official, 0 community settings
Open Sculpfun C1 3W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Plywood (2 settings) · open in finder
- MDF (1 settings) · open in finder
- Paper & Cardboard (1 settings) · open in finder
- Hardwood (1 settings) · open in finder
- Other (1 settings) · open in finder
Sculpfun C1 3W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | 3.0 mm | cut | 100.0% | 2.5 mm/s | 4 | — | Official source |
| Plywood | — | engrave | 100.0% | 50.0 mm/s | 1 | — | Official source |
| Mdf | — | engrave | 100.0% | 75.0 mm/s | 1 | — | Official source |
| Kraft paper | — | engrave | 100.0% | 133.3 mm/s | 1 | — | Official source |
| Leaves | — | engrave | 100.0% | 58.3 mm/s | 1 | — | Official source |
| Black metal nameplate | — | engrave | 100.0% | 58.3 mm/s | 1 | 0.02 mm | Official source |
Sponsored · Ad space available
Similar machines
- Sculpfun iCube 5W (5W diode)
- Sculpfun S6 Pro 6W (6W diode)
- Sculpfun S10 Pro (10W diode)
- Sculpfun S30 Pro 10W (10W diode)
- Sculpfun S9 (10W diode + 5W diode)
- Sculpfun iCube 10W (10W diode)