Sculpfun S30 Pro 10W Laser Settings

Name: Sculpfun S30 Pro 10W laser settings
Creator: MakerDial

10W diode · 12 official, 0 community settings

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Materials with settings

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Mdf	2.7 mm	cut	100.0%	7.0 mm/s	3	—	Official source
Plywood	3.0 mm	cut	100.0%	8.0 mm/s	1	—	Official source
Mdf	5.0 mm	cut	80.0%	6.0 mm/s	3	—	Official source
Plywood	6.0 mm	cut	100.0%	4.8 mm/s	2	—	Official source
Black acrylic	6.0 mm	cut	100.0%	3.0 mm/s	5	—	Official source
Paulownia	10.0 mm	cut	100.0%	4.0 mm/s	2	—	Official source
Paulownia	15.0 mm	cut	100.0%	3.2 mm/s	4	—	Official source
Plywood	—	engrave	35.0%	50.0 mm/s	1	—	Official source
Mdf	—	engrave	35.0%	50.0 mm/s	1	—	Official source
Black acrylic	—	engrave	45.0%	33.3 mm/s	1	—	Official source
Kraft paper	—	engrave	25.0%	30.0 mm/s	1	—	Official source
Leather	—	engrave	15.0%	30.0 mm/s	1	—	Official source

Sponsored · Ad space available