Sculpfun S30 Ultra 11W Laser Settings

Name: Sculpfun S30 Ultra 11W laser settings
Creator: MakerDial

11W diode · 15 official, 0 community settings

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Materials with settings

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Mdf	2.7 mm	cut	70.0%	3.0 mm/s	1	—	Official source
Plywood	3.0 mm	cut	100.0%	8.0 mm/s	1	—	Official source
Mdf	5.0 mm	cut	100.0%	3.0 mm/s	3	—	Official source
Plywood	6.0 mm	cut	90.0%	3.0 mm/s	1	—	Official source
Black acrylic	6.0 mm	cut	100.0%	3.0 mm/s	5	—	Official source
Plywood	8.0 mm	cut	100.0%	2.5 mm/s	2	—	Official source
Paulownia	10.0 mm	cut	90.0%	3.0 mm/s	1	—	Official source
Black acrylic	11.0 mm	cut	100.0%	3.0 mm/s	16	—	Official source
Plywood	12.0 mm	cut	100.0%	3.3 mm/s	3	—	Official source
Paulownia	15.0 mm	cut	100.0%	16.7 mm/s	10	—	Official source
Plywood	—	engrave	30.0%	50.0 mm/s	1	—	Official source
Mdf	—	engrave	40.0%	50.0 mm/s	1	—	Official source
Black acrylic	—	engrave	40.0%	50.0 mm/s	1	—	Official source
Kraft paper	—	engrave	10.0%	30.0 mm/s	1	—	Official source
Leather	—	engrave	15.0%	30.0 mm/s	1	—	Official source

Sponsored · Ad space available