Sculpfun S30 Pro 20W Plywood Settings (Cut & Engrave)

Name: Sculpfun S30 Pro 20W Plywood Settings (Cut & Engrave)
Creator: MakerDial

22 sourced settings for plywood on the Sculpfun S30 Pro 20W (20W diode), thickness 2, 3, 6, 8, 9, 12 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Plywood	3.0 mm	cut	70.0%	11.7 mm/s	1	—	Official source
Plywood	6.0 mm	cut	80.0%	6.7 mm/s	1	—	Official source
Plywood	8.0 mm	cut	100.0%	6.2 mm/s	2	—	Official source
Plywood	12.0 mm	cut	100.0%	4.2 mm/s	2	—	Official source
Plywood	—	cut	100.0%	10.0 mm/s	2	—	Community source
Plywood	—	cut	100.0%	20.0 mm/s	3	—	Community source
Plywood	—	cut	90.0%	33.3 mm/s	2	—	Community source
2mm Basswood Plywood	2.0 mm	cut	95.0%	66.7 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	cut	100.0%	8.3 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	78.0%	8.3 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	cut	75.0%	10.0 mm/s	1	—	Community source
6mm Basswood Plywood	6.0 mm	cut	88.0%	4.2 mm/s	1	—	Community source
6mm Baltic Birch Plywood	6.0 mm	cut	100.0%	3.3 mm/s	3	—	Community source
9mm Birch Plywood	9.0 mm	cut	100.0%	8.3 mm/s	7	—	Community source
Plywood	—	engrave	65.0%	50.0 mm/s	1	—	Community source
Plywood	—	engrave	60.0%	75.0 mm/s	1	—	Community source
2mm Basswood Plywood	2.0 mm	engrave	45.0%	116.7 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	engrave	50.0%	83.3 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	engrave	35.0%	33.3 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	engrave	30.0%	133.3 mm/s	1	0.1 mm	Community source
6mm Basswood Plywood	6.0 mm	engrave	40.0%	33.3 mm/s	1	—	Community source
6mm Baltic Birch Plywood	6.0 mm	engrave	45.0%	33.3 mm/s	1	—	Community source

Sponsored · Ad space available