Sculpfun S30 Pro Max 20W Plywood Settings (Cut & Engrave)

Name: Sculpfun S30 Pro Max 20W Plywood Settings (Cut & Engrave)
Creator: MakerDial

10 sourced settings for plywood on the Sculpfun S30 Pro Max 20W (20W diode), thickness 3, 6 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Plywood	—	cut	80.0%	58.3 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	80.0%	58.3 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	cut	100.0%	6.7 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	cut	100.0%	8.3 mm/s	1	—	Community source
6mm Baltic Birch Plywood	6.0 mm	cut	100.0%	3.3 mm/s	3	—	Community source
Plywood	—	engrave	35.0%	133.3 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	engrave	45.0%	33.3 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	engrave	35.0%	133.3 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	engrave	50.0%	83.3 mm/s	1	0.1 mm	Community source
6mm Baltic Birch Plywood	6.0 mm	engrave	45.0%	33.3 mm/s	1	—	Community source

Sponsored · Ad space available