Sculpfun S6 Pro 6W Plywood Settings (Cut & Engrave)
10 sourced settings for plywood on the Sculpfun S6 Pro 6W (6W diode), thickness 3 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | — | cut | 95.0% | 13.3 mm/s | 3 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 100.0% | 3.3 mm/s | 3 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 100.0% | 30.0 mm/s | 3 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 100.0% | 33.3 mm/s | 3 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 95.0% | 13.3 mm/s | 3 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 100.0% | 2.0 mm/s | 4 | — | Community source |
| Plywood | — | engrave | 45.0% | 41.7 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | engrave | 55.0% | 20.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | engrave | 45.0% | 41.7 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 60.0% | 50.0 mm/s | 1 | 0.1 mm | Community source |
Sponsored · Ad space available