Sculpfun S9 Plywood Settings (Cut & Engrave)
12 sourced settings for plywood on the Sculpfun S9 (10W diode + 5W diode), thickness 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | 3.0 mm | cut | 80.0% | 4.0 mm/s | 1 | — | Official source |
| Plywood | 6.0 mm | cut | 100.0% | 3.5 mm/s | 2 | — | Official source |
| Plywood | — | engrave | 40.0% | 50.0 mm/s | 1 | — | Official source |
| Plywood | — | cut | 80.0% | 5.0 mm/s | 4 | — | Community source |
| Plywood | — | cut | 100.0% | 5.0 mm/s | 2 | — | Community source |
| Plywood | — | cut | 85.0% | 8.33 mm/s | 7 | — | Community source |
| Plywood | — | cut | 85.0% | 8.3 mm/s | 7 | — | Community source |
| Plywood | — | cut | 100.0% | 15.0 mm/s | 3 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 100.0% | 3.0 mm/s | 3 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 100.0% | 3.3 mm/s | 3 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | engrave | 45.0% | 33.3 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 60.0% | 33.3 mm/s | 1 | 0.1 mm | Community source |
Sponsored · Ad space available