Sculpfun SF-A9 40W Plywood Settings (Cut & Engrave)
15 sourced settings for plywood on the Sculpfun SF-A9 40W (40W diode), thickness 3, 6, 8, 12, 15, 20 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | 3.0 mm | cut | 100.0% | 18.3 mm/s | 1 | — | Official source |
| Plywood | 6.0 mm | cut | 100.0% | 8.3 mm/s | 1 | — | Official source |
| Plywood | 8.0 mm | cut | 100.0% | 5.8 mm/s | 1 | — | Official source |
| Plywood | 12.0 mm | cut | 100.0% | 5.0 mm/s | 1 | — | Official source |
| Plywood | 15.0 mm | cut | 100.0% | 4.2 mm/s | 1 | — | Official source |
| Plywood | 20.0 mm | cut | 100.0% | 50.0 mm/s | 30 | — | Official source |
| Plywood | — | engrave | 20.0% | 100.0 mm/s | 1 | — | Official source |
| Plywood | — | cut | 100.0% | 7.5 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 75.0% | 83.3 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 100.0% | 10.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 100.0% | 3.3 mm/s | 3 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | engrave | 35.0% | 133.3 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | engrave | 45.0% | 83.3 mm/s | 1 | 0.1 mm | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 50.0% | 100.0 mm/s | 1 | 0.1 mm | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | engrave | 45.0% | 33.3 mm/s | 1 | — | Community source |
Sponsored · Ad space available