Snapmaker 2.0 (A150/A250/A350) laser modules Plywood Settings (Cut & Engrave & Vector engrave)

15 sourced settings for plywood on the Snapmaker 2.0 (A150/A250/A350) laser modules (1.6W diode + 10W diode + 20W diode + 40W diode + 2W infrared), thickness 1.5, 3, 3.175, 5, 6, 8 mm.

Open in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Basswood plywood	1.5 mm	cut	100.0%	10.0 mm/s	1	—	Official source
Basswood plywood	1.5 mm	cut	100.0%	15.0 mm/s	1	—	Official source
Basswood plywood	3.0 mm	cut	100.0%	7.0 mm/s	1	—	Official source
Basswood plywood	3.0 mm	cut	100.0%	13.0 mm/s	1	—	Official source
Plywood	3.175 mm	cut	100.0%	2.0 mm/s	1	—	Official source
Plywood	3.175 mm	cut	100.0%	2.0 mm/s	1	—	Official source
Basswood plywood	5.0 mm	cut	100.0%	5.0 mm/s	1	—	Official source
Basswood plywood	5.0 mm	cut	100.0%	10.0 mm/s	1	—	Official source
Basswood plywood	6.0 mm	cut	100.0%	2.0 mm/s	1	—	Official source
Basswood plywood	6.0 mm	cut	100.0%	9.0 mm/s	1	—	Official source
Basswood plywood	8.0 mm	cut	100.0%	6.0 mm/s	1	—	Official source
Basswood plywood	—	engrave	20.0%	70.0 mm/s	1	0.1 mm	Official source
Basswood plywood	—	engrave	20.0%	70.0 mm/s	1	0.1 mm	Official source
Basswood plywood	—	vector engrave	100.0%	70.0 mm/s	1	—	Official source
Basswood plywood	—	vector engrave	40.0%	80.0 mm/s	1	—	Official source

Sponsored · Ad space available

Snapmaker 2.0 (A150/A250/A350) laser modules Plywood Settings (Cut & Engrave & Vector engrave)

Settings table

More