Snapmaker Ray 20W Laser Settings

Name: Snapmaker Ray 20W laser settings
Creator: MakerDial

20W diode · 0 official, 74 community settings

Open Snapmaker Ray 20W in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Modules & add-ons

20W Diode (blue) source
2W Infrared 1064nm (optional) — Optional 2W 1064nm IR module (Ray: up to 500–600 mm/s). source

Materials with settings

Plywood (13 settings) · open in finder
Hardwood (9 settings) · open in finder
Paper & Cardboard (7 settings) · open in finder
Plastics & Laminates (6 settings) · open in finder
Bamboo (5 settings) · open in finder
Fabric & Felt (5 settings) · open in finder
Leather (5 settings) · open in finder
MDF (5 settings) · open in finder
Acrylic (4 settings) · open in finder
Foam, Rubber & Cork (4 settings) · open in finder
Slate, Stone & Tile (4 settings) · open in finder
Basswood (2 settings) · open in finder
Stainless steel (2 settings) · open in finder
Anodized aluminum (1 settings) · open in finder
Brass, Copper & Other Metals (1 settings) · open in finder
Glass (1 settings) · open in finder

Snapmaker Ray 20W settings (power, speed, passes)

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Plywood	—	cut	100.0%	10.0 mm/s	1	—	Community source
Plywood	—	cut	100.0%	5.0 mm/s	1	—	Community source
Bamboo	—	cut	90.0%	4.0 mm/s	1	—	Community source
Plywood	—	cut	100.0%	2.0 mm/s	1	—	Community source
Walnut	—	cut	100.0%	5.0 mm/s	1	—	Community source
Walnut	—	cut	100.0%	4.0 mm/s	1	—	Community source
Walnut	—	cut	100.0%	2.0 mm/s	1	—	Community source
Walnut	—	cut	100.0%	1.0 mm/s	1	—	Community source
Acrylic	—	cut	100.0%	2.0 mm/s	1	—	Community source
Acrylic	—	cut	100.0%	1.0 mm/s	2	—	Community source
Polypropylene (Coroplast)	—	cut	59.0%	26.7 mm/s	1	—	Community source
Delrin / Acetal	—	cut	99.0%	18.3 mm/s	2	—	Community source
Bamboo	—	cut	85.0%	25.0 mm/s	1	—	Community source
Cotton Fabric	—	cut	75.0%	58.3 mm/s	1	—	Community source
Denim Fabric	—	cut	80.0%	58.3 mm/s	1	—	Community source
Faux Leather	—	cut	75.0%	41.7 mm/s	1	—	Community source
Kraft Paper	—	cut	40.0%	30.0 mm/s	1	—	Community source
Cork	—	cut	70.0%	33.3 mm/s	1	—	Community source
Maple	—	cut	100.0%	30.0 mm/s	4	—	Community source
Cardstock	—	cut	25.0%	83.3 mm/s	1	—	Community source
Cardboard	—	cut	45.0%	83.3 mm/s	1	—	Community source
Cork	—	cut	70.0%	66.7 mm/s	1	—	Community source
Basswood	—	cut	85.0%	41.7 mm/s	2	—	Community source
Chipboard 2mm	2.0 mm	cut	80.0%	50.0 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	cut	100.0%	7.0 mm/s	1	—	Community source
3mm Black Acrylic	3.0 mm	cut	100.0%	1.0 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	cut	88.0%	25.0 mm/s	1	—	Community source
Genuine Leather (Veg-Tan, ~3mm)	3.0 mm	cut	95.0%	41.7 mm/s	2	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	85.0%	41.7 mm/s	2	—	Community source
3mm MDF	3.0 mm	cut	85.0%	41.7 mm/s	2	—	Community source
6mm Basswood Plywood	6.0 mm	cut	100.0%	2.0 mm/s	1	—	Community source
Bamboo	—	engrave	80.0%	300.0 mm/s	1	0.1 mm	Community source
Plywood	—	engrave	45.0%	150.0 mm/s	1	0.1 mm	Community source
Walnut	—	engrave	50.0%	200.0 mm/s	1	0.1 mm	Community source
Walnut	—	engrave	100.0%	333.3 mm/s	1	0.2 mm	Community source
Walnut	—	engrave	100.0%	110.0 mm/s	1	—	Community source
Corrugated Cardboard	—	engrave	30.0%	150.0 mm/s	1	0.1 mm	Community source
MDF	—	engrave	50.0%	200.0 mm/s	1	0.1 mm	Community source
Canvas	—	engrave	30.0%	125.0 mm/s	1	0.1 mm	Community source
Ceramic Tile	—	engrave	80.0%	8.0 mm/s	1	0.1 mm	Community source

Showing 40 of 74. See all in the finder.

Sponsored · Ad space available

Similar machines

Snapmaker Ray 40W (40W diode)
AtomStack A20 Pro 20W (20W diode)
AtomStack A20 Pro V2 (20W diode)
AtomStack Kraft (20W diode + 1.2W IR) (20W diode)
AtomStack S20 Pro 20W (20W diode)
AtomStack X20 Pro 20W (20W diode)