Snapmaker Ray 40W Plywood Settings (Cut & Engrave)
12 sourced settings for plywood on the Snapmaker Ray 40W (40W diode), thickness 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | — | cut | 100.0% | 2.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 15.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 10.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 100.0% | 6.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 100.0% | 13.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 75.0% | 83.3 mm/s | 1 | — | Community source |
| 6mm Basswood Plywood | 6.0 mm | cut | 100.0% | 9.0 mm/s | 1 | — | Community source |
| Plywood | — | engrave | 30.0% | 140.0 mm/s | 1 | 0.1 mm | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 50.0% | 200.0 mm/s | 1 | 0.1 mm | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 90.0% | 500.0 mm/s | 1 | 0.2 mm | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 80.0% | 90.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | engrave | 35.0% | 133.3 mm/s | 1 | — | Community source |
Sponsored · Ad space available