xTool D1 Pro 40W Plywood Settings (Cut & Engrave & Raster engrave)

Name: xTool D1 Pro 40W Plywood Settings (Cut & Engrave & Raster engrave)
Creator: MakerDial

14 sourced settings for plywood on the xTool D1 Pro 40W (40W diode), thickness 3, 8, 15 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Basswood plywood	3 mm	cut	100%	13 mm/s	1	—	Official source
Cherry Plywood	3.0 mm	cut	100.0%	12.0 mm/s	1	—	Official source
Basswood plywood	8.0 mm	cut	100.0%	6.0 mm/s	1	—	Official source
Basswood plywood	15 mm	cut	100%	2 mm/s	1	—	Official source
Basswood plywood	3 mm	engrave (raster)	20%	100 mm/s	—	0.1 mm	Official source
Cherry Plywood	3.0 mm	raster engrave	8.0%	100.0 mm/s	—	0.1 mm	Official source
Pine Plywood	3.0 mm	raster engrave	15.0%	120.0 mm/s	—	0.1 mm	Official source
Basswood plywood	8.0 mm	raster engrave	20.0%	100.0 mm/s	—	0.125 mm	Official source
Basswood plywood	15.0 mm	raster engrave	20.0%	100.0 mm/s	—	0.125 mm	Official source
Basswood plywood	3.0 mm	vector engrave	15.0%	50.0 mm/s	—	—	Official source
Cherry Plywood	3.0 mm	vector engrave	20.0%	40.0 mm/s	—	—	Official source
Fraxinus Mandshurica Plywood	3.0 mm	vector engrave	20.0%	50.0 mm/s	—	—	Official source
Basswood plywood	8.0 mm	vector engrave	20.0%	40.0 mm/s	—	—	Official source
Basswood plywood	15.0 mm	vector engrave	20.0%	40.0 mm/s	—	—	Official source

Sponsored · Ad space available