xTool M1 10W Plywood Settings (Cut & Engrave & Laser bitmap engraving)
12 sourced settings for plywood on the xTool M1 10W (10W diode), thickness 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Basswood plywood | 3.0 mm | laser bitmap engraving | 70.0% | 175.0 mm/s | 1 | — | Official source |
| Pine plywood | 3.0 mm | laser vector engraving | 70.0% | 70.0 mm/s | 1 | — | Official source |
| Basswood plywood | 3.0 mm | tool cutting | 100.0% | 4.0 mm/s | 1 | — | Official source |
| Pine plywood | 3.0 mm | tool cutting | 60.0% | 40.0 mm/s | 1 | — | Official source |
| Plywood | — | cut | 100.0% | 25.0 mm/s | 3 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 100.0% | 6.7 mm/s | 2 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 100.0% | 30.0 mm/s | 3 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 100.0% | 3.0 mm/s | 3 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 100.0% | 5.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | engrave | 42.0% | 33.3 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 50.0% | 33.3 mm/s | 1 | 0.1 mm | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | engrave | 30.0% | 100.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available