xTool M1 Ultra 20W diode Plywood Settings (Cut & Engrave)

Name: xTool M1 Ultra 20W diode Plywood Settings (Cut & Engrave)
Creator: MakerDial

14 sourced settings for plywood on the xTool M1 Ultra 20W diode (20W diode), thickness 3, 6, 8, 12 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
1/8"(3mm) Basswood Plywood	3.0 mm	cut	90.0%	10.0 mm/s	1	—	Community source
1/4"(6mm) Basswood Plywood	6.0 mm	cut	80.0%	6.0 mm/s	4	—	Community source
1/8"(3mm) Basswood Plywood	3.0 mm	engrave	30.0%	130.0 mm/s	1	—	Community source
1/4"(6mm) Basswood Plywood	6.0 mm	engrave	30.0%	130.0 mm/s	1	—	Community source
1/3"(8mm) Basswood Plywood	8.0 mm	engrave	30.0%	130.0 mm/s	1	—	Community source
1/2"(12mm) Basswood Plywood	12.0 mm	engrave	30.0%	130.0 mm/s	1	—	Community source
1/8"(3mm) Basswood Plywood	3.0 mm	engrave (fill)	30.0%	130.0 mm/s	1	—	Community source
1/4"(6mm) Basswood Plywood	6.0 mm	engrave (fill)	30.0%	130.0 mm/s	1	—	Community source
1/3"(8mm) Basswood Plywood	8.0 mm	engrave (fill)	30.0%	130.0 mm/s	1	—	Community source
1/2"(12mm) Basswood Plywood	12.0 mm	engrave (fill)	30.0%	130.0 mm/s	1	—	Community source
1/8"(3mm) Basswood Plywood	3.0 mm	score (line)	20.0%	100.0 mm/s	1	—	Community source
1/4"(6mm) Basswood Plywood	6.0 mm	score (line)	20.0%	100.0 mm/s	1	—	Community source
1/3"(8mm) Basswood Plywood	8.0 mm	score (line)	20.0%	100.0 mm/s	1	—	Community source
1/2"(12mm) Basswood Plywood	12.0 mm	score (line)	20.0%	100.0 mm/s	1	—	Community source

Sponsored · Ad space available