xTool P2 55W CO2 Foam, Rubber & Cork Settings (Bitmap engrave & Cut & Engrave)
25 sourced settings for foam, rubber & cork on the xTool P2 55W CO2 (55W CO2), thickness 2.3, 5, 6, 10, 12 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Cork board | 5.0 mm | bitmap engrave | 15.0% | 500.0 mm/s | 1 | 0.1 mm | Official source |
| EVA pad | 5.0 mm | bitmap engrave | 12.0% | 500.0 mm/s | 1 | 0.1 mm | Official source |
| EVA pad | 10.0 mm | bitmap engrave | 12.0% | 500.0 mm/s | 1 | 0.1 mm | Official source |
| Foam | — | cut | 40% | 50 mm/s | 1 | — | Official source |
| Rubber (laser engravable) | 2.3 mm | cut | 100% | 10 mm/s | 1 | — | Official source |
| EVA foam | 5 mm | cut | 70% | 60 mm/s | 1 | — | Official source |
| Rubber (laser engravable) | 2.3 mm | engrave (bitmap) | 15% | 200 mm/s | 3 | 0.05 mm | Official source |
| EVA foam | 5 mm | engrave (bitmap) | 12% | 600 mm/s | 1 | 0.1 mm | Official source |
| Cork | 5 mm | engrave (bitmap) | 12% | 600 mm/s | 1 | 0.1 mm | Official source |
| Rubber (laser engravable) | 2.3 mm | engrave (vector) | 60% | 140 mm/s | 1 | — | Official source |
| EVA foam | 5 mm | engrave (vector) | 5% | 160 mm/s | 1 | — | Official source |
| Cork | 5 mm | engrave (vector) | 12% | 160 mm/s | 1 | — | Official source |
| EVA pad | 10.0 mm | laser cut | 70.0% | 40.0 mm/s | 1 | — | Official source |
| EVA pad | 10.0 mm | score | 5.0% | 160.0 mm/s | 1 | — | Official source |
| EVA pad | 10.0 mm | vector engrave | 12.0% | 600.0 mm/s | 1 | 0.1 mm | Official source |
| Cork board | 12.0 mm | vector engrave | 12.0% | 600.0 mm/s | 1 | 0.1 mm | Official source |
| Cork | — | cut | 35.0% | 50.0 mm/s | 1 | — | Community source |
| Rubber Stamp Material | — | cut | 50.0% | 15.0 mm/s | 1 | — | Community source |
| Cork | — | cut | 25.0% | 38.0 mm/s | 1 | — | Community source |
| Foam Board 5mm | 5.0 mm | cut | 25.0% | 58.0 mm/s | 1 | — | Community source |
| EVA Foam 6mm | 6.0 mm | cut | 23.0% | 62.0 mm/s | 1 | — | Community source |
| Cork | — | engrave | 10.0% | 500.0 mm/s | 1 | — | Community source |
| Rubber Stamp Material | — | engrave | 16.0% | 270.0 mm/s | 1 | — | Community source |
| Foam Board 5mm | 5.0 mm | engrave | 10.0% | 500.0 mm/s | 1 | — | Community source |
| EVA Foam 6mm | 6.0 mm | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available
More
- All xTool P2 55W CO2 settings
- Glowforge Basic foam, rubber & cork settings
- Glowforge Plus foam, rubber & cork settings
- Glowforge Pro foam, rubber & cork settings
- K40 CO2 35W foam, rubber & cork settings
- Monport 40W CO2 foam, rubber & cork settings
- OMTech 40W CO2 foam, rubber & cork settings
- Laser engraving pricing calculator