xTool P2 55W CO2 Paper & Cardboard Settings (Bitmap engrave & Cut & Engrave)
24 sourced settings for paper & cardboard on the xTool P2 55W CO2 (55W CO2), thickness 3.5 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Craft paper (300g) | — | bitmap engrave | 15.0% | 250.0 mm/s | 1 | 0.1 mm | Official source |
| Corrugated Paper | 3.5 mm | bitmap engrave | 15.0% | 400.0 mm/s | 1 | 0.1 mm | Official source |
| Paper/cardstock (craft 300gsm) | — | cut | 80% | 60 mm/s | 1 | — | Official source |
| Paper/cardstock (corrugated) | 3.5 mm | cut | 100% | 50 mm/s | 1 | — | Official source |
| Paper/cardstock (craft 300gsm) | — | engrave (bitmap) | 15% | 400 mm/s | 1 | 0.1 mm | Official source |
| Paper/cardstock (corrugated) | 3.5 mm | engrave (bitmap) | 10% | 400 mm/s | 1 | 0.1 mm | Official source |
| Paper/cardstock (craft 300gsm) | — | engrave (vector) | 5% | 160 mm/s | 1 | — | Official source |
| Paper/cardstock (corrugated) | 3.5 mm | engrave (vector) | 7% | 160 mm/s | 1 | — | Official source |
| Cardboard | — | cut | 12.0% | 250.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | cut | 8.0% | 180.0 mm/s | 1 | — | Community source |
| Cardstock | — | cut | 10.0% | 150.0 mm/s | 1 | — | Community source |
| Paper | — | cut | 8.0% | 200.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | cut | 32.0% | 48.0 mm/s | 1 | — | Community source |
| Mylar Stencil 7.5mil | — | cut | 12.0% | 90.0 mm/s | 1 | — | Community source |
| Copy Paper 80gsm | — | cut | 9.0% | 130.0 mm/s | 1 | — | Community source |
| Cardstock 300gsm | — | cut | 12.0% | 110.0 mm/s | 1 | — | Community source |
| Corrugated Cardboard | — | engrave | 10.0% | 500.0 mm/s | 1 | — | Community source |
| Mylar Stencil 7.5mil | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Copy Paper 80gsm | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Cardstock 300gsm | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Cardstock | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Kraft Paper | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Paper | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
| Cardboard | — | engrave | 8.0% | 500.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available
More
- All xTool P2 55W CO2 settings
- Glowforge Basic paper & cardboard settings
- Glowforge Plus paper & cardboard settings
- Glowforge Pro paper & cardboard settings
- K40 CO2 35W paper & cardboard settings
- Monport GP 40W CO2 paper & cardboard settings
- OMTech 40W CO2 paper & cardboard settings
- Laser engraving pricing calculator