xTool S1 40W diode Foam, Rubber & Cork Settings (Cut & Engrave)

Name: xTool S1 40W diode Foam, Rubber & Cork Settings (Cut & Engrave)
Creator: MakerDial

25 sourced settings for foam, rubber & cork on the xTool S1 40W diode (40W diode), thickness 3, 5, 6 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Cork	—	cut	85.0%	13.3 mm/s	2	—	Community source
Foam	—	cut	50.0%	100.0 mm/s	1	—	Community source
Cork	—	cut	80.0%	20.0 mm/s	1	—	Community source
Foam	—	cut	20.0%	20.0 mm/s	1	—	Community source
Cork	—	cut	55.0%	83.3 mm/s	1	—	Community source
Cork	—	cut	60.0%	41.7 mm/s	1	—	Community source
Rubber Stamp Material	—	cut	100.0%	16.7 mm/s	2	—	Community source
Rubber Stamp Material	—	cut	100.0%	10.0 mm/s	2	—	Community source
Cork	—	cut	35.0%	108.3 mm/s	1	—	Community source
Cork	—	cut	70.0%	20.0 mm/s	1	—	Community source
EVA Foam 3mm	3.0 mm	cut	45.0%	133.3 mm/s	1	—	Community source
EVA Foam 3mm	3.0 mm	cut	50.0%	20.0 mm/s	1	—	Community source
Foam Board 5mm	5.0 mm	cut	32.0%	108.3 mm/s	2	—	Community source
EVA Foam 6mm	6.0 mm	cut	35.0%	91.7 mm/s	1	—	Community source
Cork	—	engrave	45.0%	66.7 mm/s	1	—	Community source
Cork	—	engrave	45.0%	116.7 mm/s	1	—	Community source
Photopolymer Stamp Blank	—	engrave	55.0%	50.0 mm/s	1	—	Community source
Foam	—	engrave	10.0%	66.7 mm/s	1	—	Community source
Cork	—	engrave	30.0%	133.3 mm/s	1	—	Community source
Rubber Stamp Material	—	engrave	75.0%	58.3 mm/s	1	—	Community source
Rubber Stamp Material	—	engrave	70.0%	33.3 mm/s	1	0.051 mm	Community source
EVA Foam 3mm	3.0 mm	engrave	20.0%	166.7 mm/s	1	—	Community source
EVA Foam 3mm	3.0 mm	engrave	25.0%	58.3 mm/s	1	—	Community source
Foam Board 5mm	5.0 mm	engrave	15.0%	133.3 mm/s	1	—	Community source
EVA Foam 6mm	6.0 mm	engrave	15.0%	133.3 mm/s	1	—	Community source

Sponsored · Ad space available