AtomStack A20 Pro 20W Paper & Cardboard Settings (Cut & Engrave)

Name: AtomStack A20 Pro 20W Paper & Cardboard Settings (Cut & Engrave)
Creator: MakerDial

17 sourced settings for paper & cardboard on the AtomStack A20 Pro 20W (20W diode).

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Kraft Paper	—	cut	22.0%	41.7 mm/s	1	—	Community source
Cardstock	—	cut	35.0%	25.0 mm/s	1	—	Community source
Paper	—	cut	25.0%	33.3 mm/s	1	—	Community source
Kraft Paper	—	cut	80.0%	50.0 mm/s	1	—	Community source
Corrugated Cardboard	—	cut	48.0%	75.0 mm/s	2	—	Community source
Mylar Stencil 7.5mil	—	cut	25.0%	116.7 mm/s	1	—	Community source
Copy Paper 80gsm	—	cut	25.0%	133.3 mm/s	1	—	Community source
Cardstock 300gsm	—	cut	35.0%	100.0 mm/s	1	—	Community source
Cardboard	—	cut	50.0%	13.3 mm/s	1	—	Community source
Kraft Paper	—	engrave	15.0%	50.0 mm/s	1	0.1 mm	Community source
Corrugated Cardboard	—	engrave	20.0%	133.3 mm/s	1	—	Community source
Mylar Stencil 7.5mil	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Copy Paper 80gsm	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Cardstock 300gsm	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Cardstock	—	engrave	15.0%	75.0 mm/s	1	—	Community source
Paper	—	engrave	15.0%	100.0 mm/s	1	—	Community source
Cardboard	—	engrave	25.0%	41.7 mm/s	1	—	Community source

Sponsored · Ad space available