AtomStack A40 Max Paper & Cardboard Settings (Cut & Engrave)

Name: AtomStack A40 Max Paper & Cardboard Settings (Cut & Engrave)
Creator: MakerDial

12 sourced settings for paper & cardboard on the AtomStack A40 Max (40W diode), thickness 0.5, 0.6, 15 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Glutinous rice paper	0.5 mm	cut	—	5.0 mm/s	—	—	Official source
Glutinous rice paper	0.5 mm	cut	—	5.0 mm/s	—	—	Official source
Kraft Paper	0.6 mm	cut	—	33.33 mm/s	1	—	Official source
Kraft Paper	0.6 mm	cut	—	33.33 mm/s	1	—	Official source
Kraft Paper	—	engrave (lasergrbl)	40.0%	166.67 mm/s	1	12.0 mm	Official source
Office Paper	—	engrave (lasergrbl)	47.0%	166.67 mm/s	1	10.0 mm	Official source
Carton	—	engrave (lasergrbl)	35.0%	166.67 mm/s	1	12.0 mm	Official source
Drywall	15.0 mm	engrave (lasergrbl)	—	1.67 mm/s	1	—	Official source
Kraft Paper	—	engrave (lightburn)	40.0%	166.67 mm/s	1	0.08 mm	Official source
Office Paper	—	engrave (lightburn)	47.0%	166.67 mm/s	1	0.1 mm	Official source
Carton	—	engrave (lightburn)	35.0%	166.67 mm/s	1	0.08 mm	Official source
Drywall	15.0 mm	engrave (lightburn)	—	1.67 mm/s	1	—	Official source

Sponsored · Ad space available