AtomStack A24 Pro Paper & Cardboard Settings (Cut & Engrave)

Name: AtomStack A24 Pro Paper & Cardboard Settings (Cut & Engrave)
Creator: MakerDial

10 sourced settings for paper & cardboard on the AtomStack A24 Pro (24W diode), thickness 0.6 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Kraft Paper	0.6 mm	cut	80.0%	33.33 mm/s	1	—	Official source
Kraft Paper	0.6 mm	cut	—	33.33 mm/s	1	—	Official source
Kraft Paper	—	engrave (lasergrbl)	—	500.0 mm/s	1	10.0 mm	Official source
Office Paper	—	engrave (lasergrbl)	—	333.33 mm/s	1	10.0 mm	Official source
Oil Painting Paper	—	engrave (lasergrbl)	—	500.0 mm/s	—	10.0 mm	Official source
Carton	—	engrave (lasergrbl)	—	500.0 mm/s	1	10.0 mm	Official source
Kraft Paper	—	engrave (lightburn)	20.0%	500.0 mm/s	1	0.1 mm	Official source
Office Paper	—	engrave (lightburn)	80.0%	333.33 mm/s	1	0.1 mm	Official source
Oil Painting Paper	—	engrave (lightburn)	40.0%	500.0 mm/s	—	0.1 mm	Official source
Carton	—	engrave (lightburn)	50.0%	500.0 mm/s	1	0.1 mm	Official source

Sponsored · Ad space available