AtomStack Kraft (20W diode + 1.2W IR) Leather Settings (Cut & Engrave)
9 sourced settings for leather on the AtomStack Kraft (20W diode + 1.2W IR) (20W diode), thickness 5 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Leather | 5.0 mm | cut | 80.0% | 50.0 mm/s | 1 | — | Official source |
| Leather | — | engrave (bitmap) | 60.0% | 166.67 mm/s | 1 | 0.1 mm | Official source |
| Leather | — | engrave (bitmap) | 80.0% | 83.33 mm/s | 1 | 0.01 mm | Official source |
| Leather | — | engrave (vector line) | 30.0% | 16.67 mm/s | 1 | — | Official source |
| Leather | — | engrave (vector line) | 20.0% | 16.67 mm/s | 1 | — | Official source |
| Genuine Leather | — | engrave | 60.0% | 166.7 mm/s | 1 | 0.1 mm | Community source |
| Genuine Leather | — | engrave | 30.0% | 16.7 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 80.0% | 83.3 mm/s | 1 | 0.01 mm | Community source |
| Genuine Leather | — | engrave | 20.0% | 16.7 mm/s | 1 | — | Community source |
Sponsored · Ad space available