AtomStack S20 Pro 20W Leather Settings (Cut & Engrave)
9 sourced settings for leather on the AtomStack S20 Pro 20W (20W diode), thickness 3 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Genuine Leather | — | cut | 80.0% | 5.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 75.0% | 41.7 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 100.0% | 25.0 mm/s | 2 | — | Community source |
| Genuine Leather | — | cut | 100.0% | 6.7 mm/s | 2 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 95.0% | 41.7 mm/s | 2 | — | Community source |
| Genuine Leather | — | engrave | 20.0% | 50.0 mm/s | 1 | 0.1 mm | Community source |
| Faux Leather | — | engrave | 40.0% | 75.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 42.0% | 33.3 mm/s | 1 | 0.1 mm | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | engrave | 70.0% | 100.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available