Ortur Master 3 Leather Settings (Cut & Engrave)
10 sourced settings for leather on the Ortur Master 3 (10W diode), thickness 3 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Genuine Leather | — | cut | 100.0% | 5.0 mm/s | 1 | — | Community source |
| Faux Leather | — | cut | 68.0% | 43.3 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 90.0% | 2.5 mm/s | 3 | — | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | cut | 100.0% | 20.0 mm/s | 3 | — | Community source |
| Genuine Leather | — | engrave | 60.0% | 333.3 mm/s | 1 | 0.1 mm | Community source |
| Genuine Leather | — | engrave | 45.0% | 20.0 mm/s | 1 | — | Community source |
| Faux Leather | — | engrave | 30.0% | 133.3 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 40.0% | 66.7 mm/s | 1 | 0.085 mm | Community source |
| Genuine Leather (vegetable tanned 2mm) | — | engrave | 35.0% | 46.7 mm/s | 1 | 0.1 mm | Community source |
| Genuine Leather (Veg-Tan, ~3mm) | 3.0 mm | engrave | 80.0% | 83.3 mm/s | 1 | — | Community source |
Sponsored · Ad space available