AtomStack S20 Pro 20W Laser Settings

Name: AtomStack S20 Pro 20W laser settings
Creator: MakerDial

20W diode · 0 official, 85 community settings

Open AtomStack S20 Pro 20W in the settings finder →

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Materials with settings

Hardwood (16 settings) · open in finder
Leather (9 settings) · open in finder
Bamboo (8 settings) · open in finder
Foam, Rubber & Cork (8 settings) · open in finder
Plywood (8 settings) · open in finder
MDF (7 settings) · open in finder
Paper & Cardboard (7 settings) · open in finder
Fabric & Felt (7 settings) · open in finder
Basswood (4 settings) · open in finder
Slate, Stone & Tile (4 settings) · open in finder
Acrylic (3 settings) · open in finder
Stainless steel (2 settings) · open in finder
Glass (1 settings) · open in finder
Anodized aluminum (1 settings) · open in finder

AtomStack S20 Pro 20W settings (power, speed, passes)

Material	Thick	Job	Power	Speed	Passes	Interval	Source
MDF	—	cut	100.0%	2.7 mm/s	1	—	Community source
MDF	—	cut	100.0%	6.7 mm/s	4	—	Community source
Acrylic	—	cut	100.0%	1.7 mm/s	1	—	Community source
Acrylic	—	cut	65.0%	1.7 mm/s	10	—	Community source
Kraft Paper	—	cut	80.0%	50.0 mm/s	1	—	Community source
Genuine Leather	—	cut	80.0%	5.0 mm/s	1	—	Community source
Bamboo	—	cut	100.0%	6.7 mm/s	1	—	Community source
Bamboo	—	cut	100.0%	9.2 mm/s	3	—	Community source
Cork	—	cut	100.0%	10.0 mm/s	1	—	Community source
Cork	—	cut	70.0%	33.3 mm/s	10	—	Community source
Pine	—	cut	100.0%	2.2 mm/s	1	—	Community source
Pine	—	cut	80.0%	4.7 mm/s	10	—	Community source
Basswood	—	cut	100.0%	3.3 mm/s	1	—	Community source
Basswood	—	cut	75.0%	10.0 mm/s	6	—	Community source
Kraft Paper	—	cut	40.0%	30.0 mm/s	1	—	Community source
Faux Leather	—	cut	75.0%	41.7 mm/s	1	—	Community source
Denim Fabric	—	cut	80.0%	58.3 mm/s	1	—	Community source
Bamboo	—	cut	85.0%	25.0 mm/s	1	—	Community source
Cork	—	cut	60.0%	41.7 mm/s	1	—	Community source
Genuine Leather	—	cut	100.0%	25.0 mm/s	2	—	Community source
Cardstock	—	cut	40.0%	58.3 mm/s	1	—	Community source
Bamboo Cutting Board	—	cut	95.0%	11.7 mm/s	2	—	Community source
Cedar	—	cut	75.0%	16.7 mm/s	2	—	Community source
Alder	—	cut	100.0%	13.3 mm/s	2	—	Community source
Cherry	—	cut	95.0%	13.3 mm/s	2	—	Community source
Oak	—	cut	100.0%	11.7 mm/s	2	—	Community source
Maple	—	cut	100.0%	30.0 mm/s	4	—	Community source
Walnut	—	cut	100.0%	30.0 mm/s	4	—	Community source
Felt	—	cut	80.0%	11.7 mm/s	1	—	Community source
Cotton Fabric	—	cut	75.0%	8.3 mm/s	1	—	Community source
Cardboard	—	cut	80.0%	13.3 mm/s	1	—	Community source
Genuine Leather	—	cut	100.0%	6.7 mm/s	2	—	Community source
Plywood (3mm birch ply)	—	cut	90.0%	8.3 mm/s	1	—	Community source
Chipboard 2mm	2.0 mm	cut	88.0%	16.7 mm/s	1	—	Community source
Genuine Leather (Veg-Tan, ~3mm)	3.0 mm	cut	95.0%	41.7 mm/s	2	—	Community source
EVA Foam 3mm	3.0 mm	cut	70.0%	10.0 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	cut	100.0%	4.5 mm/s	2	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	100.0%	4.2 mm/s	3	—	Community source
3mm MDF	3.0 mm	cut	100.0%	4.2 mm/s	3	—	Community source
3mm Basswood Plywood	3.0 mm	cut	100.0%	5.0 mm/s	2	—	Community source

Showing 40 of 85. See all in the finder.

Sponsored · Ad space available

Similar machines

AtomStack A20 Pro 20W (20W diode)
AtomStack A20 Pro V2 (20W diode)
AtomStack Kraft (20W diode + 1.2W IR) (20W diode)
AtomStack X20 Pro 20W (20W diode)
AtomStack A24 Pro (24W diode)
AtomStack A24 Ultra (24W diode)