AtomStack S20 Pro 20W Hardwood Settings (Cut & Engrave)

Name: AtomStack S20 Pro 20W Hardwood Settings (Cut & Engrave)
Creator: MakerDial

16 sourced settings for hardwood on the AtomStack S20 Pro 20W (20W diode).

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Pine	—	cut	100.0%	2.2 mm/s	1	—	Community source
Pine	—	cut	80.0%	4.7 mm/s	10	—	Community source
Cedar	—	cut	75.0%	16.7 mm/s	2	—	Community source
Alder	—	cut	100.0%	13.3 mm/s	2	—	Community source
Cherry	—	cut	95.0%	13.3 mm/s	2	—	Community source
Oak	—	cut	100.0%	11.7 mm/s	2	—	Community source
Maple	—	cut	100.0%	30.0 mm/s	4	—	Community source
Walnut	—	cut	100.0%	30.0 mm/s	4	—	Community source
Pine	—	engrave	20.0%	50.0 mm/s	1	0.1 mm	Community source
Maple	—	engrave	75.0%	83.3 mm/s	1	—	Community source
Walnut	—	engrave	75.0%	83.3 mm/s	1	—	Community source
Cedar	—	engrave	48.0%	58.3 mm/s	1	0.1 mm	Community source
Alder	—	engrave	63.0%	46.7 mm/s	1	0.1 mm	Community source
Pine	—	engrave	55.0%	58.3 mm/s	1	0.1 mm	Community source
Cherry	—	engrave	60.0%	50.0 mm/s	1	0.1 mm	Community source
Oak	—	engrave	70.0%	41.7 mm/s	1	0.1 mm	Community source

Sponsored · Ad space available