AtomStack A24 Ultra Hardwood Settings (Cut & Engrave)

Name: AtomStack A24 Ultra Hardwood Settings (Cut & Engrave)
Creator: MakerDial

22 sourced settings for hardwood on the AtomStack A24 Ultra (24W diode), thickness 12, 15, 18 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Pine	12.0 mm	cut	80.0%	1.67 mm/s	1	—	Official source
Pine	12.0 mm	cut	—	1.67 mm/s	1	—	Official source
Paulownia Wood	15.0 mm	cut	80.0%	3.33 mm/s	1	—	Official source
Paulownia Wood	15.0 mm	cut	—	3.33 mm/s	1	—	Official source
Cork wood	15.0 mm	cut	80.0%	11.67 mm/s	1	—	Official source
Cork wood	15.0 mm	cut	—	11.67 mm/s	1	—	Official source
Pine	18.0 mm	cut	80.0%	10.83 mm/s	9	—	Official source
Pine	18.0 mm	cut	—	10.83 mm/s	9	—	Official source
Paulownia Wood	18.0 mm	cut	80.0%	16.67 mm/s	8	—	Official source
Paulownia Wood	18.0 mm	cut	—	16.67 mm/s	8	—	Official source
Cork wood	18.0 mm	cut	80.0%	16.67 mm/s	3	—	Official source
Cork wood	18.0 mm	cut	—	16.67 mm/s	3	—	Official source
Pine	—	engrave (lasergrbl)	—	250.0 mm/s	1	10.0 mm	Official source
peach wood	—	engrave (lasergrbl)	—	333.33 mm/s	—	10.0 mm	Official source
Mahogany	—	engrave (lasergrbl)	—	500.0 mm/s	—	10.0 mm	Official source
Paulownia Wood	—	engrave (lasergrbl)	—	500.0 mm/s	1	10.0 mm	Official source
maple	—	engrave (lasergrbl)	—	250.0 mm/s	—	10.0 mm	Official source
Pine	—	engrave (lightburn)	80.0%	250.0 mm/s	1	0.1 mm	Official source
peach wood	—	engrave (lightburn)	80.0%	333.33 mm/s	—	0.1 mm	Official source
Mahogany	—	engrave (lightburn)	80.0%	500.0 mm/s	—	0.1 mm	Official source
Paulownia Wood	—	engrave (lightburn)	60.0%	500.0 mm/s	1	0.1 mm	Official source
maple	—	engrave (lightburn)	80.0%	250.0 mm/s	—	0.1 mm	Official source

Sponsored · Ad space available