AtomStack A10 Pro V2 Hardwood Settings (Cut & Engrave)

Name: AtomStack A10 Pro V2 Hardwood Settings (Cut & Engrave)
Creator: MakerDial

15 sourced settings for hardwood on the AtomStack A10 Pro V2 (10W diode), thickness 6, 8, 10, 12 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Pine	6.0 mm	cut	80.0%	1.67 mm/s	10	—	Official source
Pine	6.0 mm	cut	—	1.67 mm/s	1	—	Official source
Paulownia Wood	8.0 mm	cut	80.0%	3.17 mm/s	1	—	Official source
Paulownia Wood	8.0 mm	cut	—	3.17 mm/s	1	—	Official source
Pine	8.0 mm	cut	—	6.67 mm/s	10	—	Official source
Pine	10.0 mm	cut	100.0%	6.67 mm/s	10	—	Official source
Paulownia Wood	12.0 mm	cut	80.0%	11.67 mm/s	8	—	Official source
Paulownia Wood	12.0 mm	cut	—	11.67 mm/s	8	—	Official source
Paulownia Wood	—	engrave (lasergrbl)	—	83.33 mm/s	1	10.0 mm	Official source
Yellow Peach Wood	—	engrave (lasergrbl)	—	100.0 mm/s	1	10.0 mm	Official source
Pine	—	engrave (lasergrbl)	—	100.0 mm/s	1	12.0 mm	Official source
Mahogany	—	engrave (lasergrbl)	—	100.0 mm/s	1	12.0 mm	Official source
Paulownia Wood	—	engrave (lightburn)	50.0%	83.33 mm/s	1	0.1 mm	Official source
Yellow Peach Wood	—	engrave (lightburn)	60.0%	100.0 mm/s	1	0.1 mm	Official source
Mahogany	—	engrave (lightburn)	60.0%	100.0 mm/s	1	0.08 mm	Official source

Sponsored · Ad space available