AtomStack A20 Pro V2 Hardwood Settings (Cut & Engrave)

Name: AtomStack A20 Pro V2 Hardwood Settings (Cut & Engrave)
Creator: MakerDial

20 sourced settings for hardwood on the AtomStack A20 Pro V2 (20W diode), thickness 10, 12, 15, 16, 20 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Cork Wood	10.0 mm	cut	80.0%	5.0 mm/s	1	—	Official source
Cork Wood	10.0 mm	cut	—	5.0 mm/s	1	—	Official source
Pine	12.0 mm	cut	100.0%	1.67 mm/s	1	—	Official source
Pine	12.0 mm	cut	—	1.67 mm/s	1	—	Official source
Paulownia Wood	15.0 mm	cut	100.0%	2.5 mm/s	1	—	Official source
Paulownia Wood	15.0 mm	cut	—	2.5 mm/s	1	—	Official source
Pine	15.0 mm	cut	80.0%	8.33 mm/s	10	—	Official source
Pine	15.0 mm	cut	—	8.33 mm/s	10	—	Official source
Cork Wood	16.0 mm	cut	80.0%	33.33 mm/s	6	—	Official source
Cork Wood	16.0 mm	cut	—	33.33 mm/s	6	—	Official source
Paulownia Wood	20.0 mm	cut	80.0%	333.33 mm/s	10	—	Official source
Paulownia Wood	20.0 mm	cut	—	13.33 mm/s	10	—	Official source
Paulownia Wood	—	engrave (lasergrbl)	—	333.33 mm/s	1	10.0 mm	Official source
Yellow Peach Wood	—	engrave (lasergrbl)	80.0%	166.67 mm/s	1	12.0 mm	Official source
Pine	—	engrave (lasergrbl)	—	166.67 mm/s	1	12.0 mm	Official source
Mahogany	—	engrave (lasergrbl)	—	166.67 mm/s	1	12.0 mm	Official source
Paulownia Wood	—	engrave (lightburn)	80.0%	333.33 mm/s	1	0.1 mm	Official source
Yellow Peach Wood	—	engrave (lightburn)	80.0%	166.67 mm/s	1	0.08 mm	Official source
Pine	—	engrave (lightburn)	80.0%	166.67 mm/s	1	0.08 mm	Official source
Mahogany	—	engrave (lightburn)	70.0%	166.67 mm/s	1	0.08 mm	Official source

Sponsored · Ad space available