AtomStack A40 Pro Hardwood Settings (Cut & Engrave)

Name: AtomStack A40 Pro Hardwood Settings (Cut & Engrave)
Creator: MakerDial

14 sourced settings for hardwood on the AtomStack A40 Pro (40W diode), thickness 12, 14, 15, 20 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Pine	12.0 mm	cut	—	1.67 mm/s	1	—	Official source
Pine	12.0 mm	cut	—	1.67 mm/s	1	—	Official source
Paulownia Wood	14.0 mm	cut	—	3.33 mm/s	1	—	Official source
Paulownia Wood	14.0 mm	cut	—	3.33 mm/s	1	—	Official source
Cork Wood	15.0 mm	cut	—	8.33 mm/s	1	—	Official source
Cork Wood	15.0 mm	cut	—	8.33 mm/s	1	—	Official source
Pine	15.0 mm	cut	—	10.0 mm/s	10	—	Official source
Pine	15.0 mm	cut	—	10.0 mm/s	10	—	Official source
Paulownia Wood	20.0 mm	cut	—	12.5 mm/s	9	—	Official source
Paulownia Wood	20.0 mm	cut	—	12.5 mm/s	9	—	Official source
Paulownia Wood	—	engrave (lasergrbl)	30.0%	166.67 mm/s	1	10.0 mm	Official source
Yellow Peach Wood	—	engrave (lasergrbl)	50.0%	166.67 mm/s	1	10.0 mm	Official source
Pine	—	engrave (lasergrbl)	50.0%	166.67 mm/s	1	10.0 mm	Official source
Yellow Peach Wood	—	engrave (lightburn)	50.0%	166.67 mm/s	1	0.1 mm	Official source

Sponsored · Ad space available