Gweike Cloud Pro II 55W Laser Settings
55W CO2 · 0 official, 9 community settings
Open Gweike Cloud Pro II 55W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Leather (2 settings) · open in finder
- MDF (2 settings) · open in finder
- Acrylic (2 settings) · open in finder
- Plywood (2 settings) · open in finder
- Slate, Stone & Tile (1 settings) · open in finder
Gweike Cloud Pro II 55W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Genuine Leather | — | cut | 65.0% | 14.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 75.0% | 30.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 50.0% | 18.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 35.0% | 25.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 60.0% | 300.0 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 22.0% | 250.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 28.0% | 450.0 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | engrave | 15.0% | 250.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 28.0% | 350.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available
Similar machines
- Gweike Cloud 50W (50W CO2)
- AtomStack Hurricane (55W CO2)
- OMTech Polar Lite 55W (55W CO2)
- OMTech Polar+ 55W (55W CO2)
- xTool P2 55W CO2 (55W CO2)
- xTool P2S 55W CO2 (55W CO2)