Monport 40W CO2 Plywood Settings (Cut & Engrave)
13 sourced settings for plywood on the Monport 40W CO2 (40W CO2), thickness 3, 6 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | — | cut | 40.0% | 7.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 45.0% | 4.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 35.0% | 7.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 25.0% | 13.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 23.0% | 15.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 20.0% | 17.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 68.0% | 20.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 65.0% | 20.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 40.0% | 20.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 80.0% | 14.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | engrave | 18.0% | 380.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | engrave | 20.0% | 300.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 30.0% | 300.0 mm/s | 1 | 0.085 mm | Community source |
Sponsored · Ad space available