Monport 80W CO2 Plywood Settings (Cut & Engrave)
17 sourced settings for plywood on the Monport 80W CO2 (80W CO2), thickness 1.6, 3, 3.2, 6, 6.4, 12.7, 19.1, 25.4 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Baltic birch plywood | 1.6 mm | cut | 20% | 25 mm/s | — | — | Official source |
| Baltic birch plywood | 3.2 mm | cut | 25% | 12 mm/s | — | — | Official source |
| Baltic birch plywood | 6.4 mm | cut | 30% | 7 mm/s | — | — | Official source |
| Baltic birch plywood | 12.7 mm | cut | 35% | 5 mm/s | — | — | Official source |
| Baltic birch plywood | 19.1 mm | cut | 43% | 4 mm/s | — | — | Official source |
| Baltic birch plywood | 25.4 mm | cut | 47% | 3 mm/s | — | — | Official source |
| Plywood | — | cut | 45.0% | 35.0 mm/s | 1 | — | Community source |
| Plywood | — | cut | 68.0% | 15.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 45.0% | 35.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 35.0% | 38.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 28.0% | 35.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 68.0% | 25.0 mm/s | 1 | — | Community source |
| Plywood | — | engrave | 20.0% | 250.0 mm/s | 1 | — | Community source |
| Plywood | — | engrave | 15.0% | 500.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | engrave | 10.0% | 500.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | engrave | 15.0% | 500.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 22.0% | 400.0 mm/s | 1 | 0.085 mm | Community source |
Sponsored · Ad space available