OMTech 40W CO2 Plywood Settings (Cut & Engrave)

Name: OMTech 40W CO2 Plywood Settings (Cut & Engrave)
Creator: MakerDial

22 sourced settings for plywood on the OMTech 40W CO2 (40W CO2), thickness 2, 3, 6, 9 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Plywood	—	cut	70.0%	25.0 mm/s	1	—	Community source
Plywood	—	cut	80.0%	18.0 mm/s	2	—	Community source
Plywood	—	cut	60.0%	10.0 mm/s	2	—	Community source
2mm Basswood Plywood	2.0 mm	cut	32.0%	28.0 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	75.0%	20.0 mm/s	2	—	Community source
3mm Maple Plywood	3.0 mm	cut	48.0%	16.0 mm/s	1	—	Community source
3mm Cherry Plywood	3.0 mm	cut	46.0%	18.0 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	cut	45.0%	18.0 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	cut	40.0%	20.0 mm/s	1	—	Community source
6mm Baltic Birch Plywood	6.0 mm	cut	70.0%	7.0 mm/s	2	—	Community source
6mm Basswood Plywood	6.0 mm	cut	65.0%	8.0 mm/s	2	—	Community source
9mm Birch Plywood	9.0 mm	cut	78.0%	4.0 mm/s	3	—	Community source
Plywood	—	engrave	30.0%	450.0 mm/s	1	—	Community source
Plywood	—	engrave	20.0%	150.0 mm/s	1	—	Community source
2mm Basswood Plywood	2.0 mm	engrave	10.0%	400.0 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	engrave	15.0%	250.0 mm/s	1	—	Community source
3mm Maple Plywood	3.0 mm	engrave	30.0%	250.0 mm/s	1	0.085 mm	Community source
3mm Cherry Plywood	3.0 mm	engrave	28.0%	250.0 mm/s	1	0.085 mm	Community source
3mm Basswood Plywood	3.0 mm	engrave	30.0%	300.0 mm/s	1	0.085 mm	Community source
6mm Baltic Birch Plywood	6.0 mm	engrave	20.0%	100.0 mm/s	1	—	Community source
6mm Basswood Plywood	6.0 mm	engrave	35.0%	250.0 mm/s	1	0.085 mm	Community source
9mm Birch Plywood	9.0 mm	engrave	25.0%	100.0 mm/s	1	—	Community source

Sponsored · Ad space available