OMTech 60W CO2 Plywood Settings (Cut & Engrave)

Name: OMTech 60W CO2 Plywood Settings (Cut & Engrave)
Creator: MakerDial

21 sourced settings for plywood on the OMTech 60W CO2 (60W CO2), thickness 2, 3, 9 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Plywood	—	cut	70.0%	25.0 mm/s	1	—	Community source
Plywood	—	cut	60.0%	9.0 mm/s	1	—	Community source
Plywood	—	cut	35.0%	20.0 mm/s	2	—	Community source
Plywood	—	cut	55.0%	12.0 mm/s	1	—	Community source
Plywood	—	cut	50.0%	15.0 mm/s	1	—	Community source
Plywood	—	cut	75.0%	25.0 mm/s	1	—	Community source
Plywood	—	cut	70.0%	12.0 mm/s	1	—	Community source
2mm Basswood Plywood	2.0 mm	cut	25.0%	40.0 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	70.0%	28.0 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	cut	48.0%	22.0 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	cut	35.0%	25.0 mm/s	1	—	Community source
9mm Birch Plywood	9.0 mm	cut	65.0%	7.0 mm/s	2	—	Community source
Plywood	—	engrave	30.0%	450.0 mm/s	1	—	Community source
Plywood	—	engrave	35.0%	250.0 mm/s	2	—	Community source
Plywood	—	engrave	35.0%	225.0 mm/s	1	—	Community source
Plywood	—	engrave	16.0%	200.0 mm/s	1	—	Community source
2mm Basswood Plywood	2.0 mm	engrave	8.0%	500.0 mm/s	1	—	Community source
3mm Maple Plywood	3.0 mm	engrave	20.0%	200.0 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	engrave	15.0%	350.0 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	engrave	28.0%	350.0 mm/s	1	0.085 mm	Community source
9mm Birch Plywood	9.0 mm	engrave	20.0%	150.0 mm/s	1	—	Community source

Sponsored · Ad space available