OMTech 80W CO2 Plywood Settings (Cut & Engrave)

Name: OMTech 80W CO2 Plywood Settings (Cut & Engrave)
Creator: MakerDial

21 sourced settings for plywood on the OMTech 80W CO2 (80W CO2), thickness 2, 3, 6, 9 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Plywood	—	cut	60.0%	40.0 mm/s	1	—	Community source
Plywood	—	cut	90.0%	10.0 mm/s	1	—	Community source
Plywood	—	cut	42.0%	22.0 mm/s	1	—	Community source
Plywood	—	cut	65.0%	28.0 mm/s	1	—	Community source
Plywood	—	cut	65.0%	18.0 mm/s	1	—	Community source
2mm Basswood Plywood	2.0 mm	cut	20.0%	55.0 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	cut	60.0%	32.0 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	cut	35.0%	35.0 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	cut	30.0%	35.0 mm/s	1	—	Community source
6mm Baltic Birch Plywood	6.0 mm	cut	80.0%	15.0 mm/s	2	—	Community source
9mm Birch Plywood	9.0 mm	cut	55.0%	10.0 mm/s	2	—	Community source
Plywood	—	engrave	30.0%	600.0 mm/s	1	—	Community source
Plywood	—	engrave	30.0%	200.0 mm/s	1	—	Community source
Plywood	—	engrave	14.0%	250.0 mm/s	1	—	Community source
Plywood	—	engrave	18.0%	380.0 mm/s	1	—	Community source
2mm Basswood Plywood	2.0 mm	engrave	6.0%	600.0 mm/s	1	—	Community source
3mm Baltic Birch Plywood	3.0 mm	engrave	18.0%	420.0 mm/s	1	—	Community source
3mm Walnut Plywood	3.0 mm	engrave	10.0%	500.0 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	engrave	25.0%	400.0 mm/s	1	0.085 mm	Community source
6mm Baltic Birch Plywood	6.0 mm	engrave	35.0%	41.7 mm/s	1	—	Community source
9mm Birch Plywood	9.0 mm	engrave	16.0%	200.0 mm/s	1	—	Community source

Sponsored · Ad space available