OMTech Polar 30W Plywood Settings (Cut & Engrave)
15 sourced settings for plywood on the OMTech Polar 30W (30W CO2), thickness 2, 3, 6, 9 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Plywood | — | cut | 72.0% | 7.0 mm/s | 2 | — | Community source |
| Plywood | — | cut | 70.0% | 15.0 mm/s | 1 | — | Community source |
| 2mm Basswood Plywood | 2.0 mm | cut | 38.0% | 22.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | cut | 72.0% | 18.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | cut | 78.0% | 14.0 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 70.0% | 20.0 mm/s | 1 | — | Community source |
| 6mm Baltic Birch Plywood | 6.0 mm | cut | 88.0% | 8.0 mm/s | 2 | — | Community source |
| 9mm Birch Plywood | 9.0 mm | cut | 85.0% | 2.5 mm/s | 4 | — | Community source |
| Plywood | — | engrave | 24.0% | 120.0 mm/s | 1 | — | Community source |
| Plywood | — | engrave | 20.0% | 250.0 mm/s | 1 | — | Community source |
| 2mm Basswood Plywood | 2.0 mm | engrave | 12.0% | 350.0 mm/s | 1 | — | Community source |
| 3mm Walnut Plywood | 3.0 mm | engrave | 25.0% | 200.0 mm/s | 1 | — | Community source |
| 3mm Baltic Birch Plywood | 3.0 mm | engrave | 22.0% | 350.0 mm/s | 1 | 0.1 mm | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 20.0% | 300.0 mm/s | 1 | 0.085 mm | Community source |
| 9mm Birch Plywood | 9.0 mm | engrave | 25.0% | 100.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available