Ortur LU2-10A 10W module Laser Settings

Name: Ortur LU2-10A 10W module laser settings
Creator: MakerDial

10W diode · 20 official, 0 community settings

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Materials with settings

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Plywood	1.6 mm	cut	100.0%	8.3 mm/s	1	—	Official source
Plywood	2.8 mm	cut	100.0%	5.0 mm/s	1	—	Official source
MDF	3.0 mm	cut	100.0%	4.2 mm/s	2	—	Official source
Pine	3.0 mm	cut	100.0%	5.0 mm/s	1	—	Official source
MDF	5.0 mm	cut	100.0%	4.2 mm/s	3	—	Official source
Plywood	5.0 mm	cut	100.0%	5.0 mm/s	1	—	Official source
Pine	5.0 mm	cut	100.0%	4.2 mm/s	1	—	Official source
Plywood	8.0 mm	cut	100.0%	1.7 mm/s	1	—	Official source
Pine	8.0 mm	cut	100.0%	1.7 mm/s	1	—	Official source
Plywood	10.0 mm	cut	100.0%	1.7 mm/s	8	—	Official source
Pine	10.0 mm	cut	100.0%	1.7 mm/s	2	—	Official source
Pine	12.0 mm	cut	100.0%	1.7 mm/s	3	—	Official source
Pine	15.0 mm	cut	100.0%	1.7 mm/s	5	—	Official source
Pine	19.0 mm	cut	100.0%	1.7 mm/s	8	—	Official source
MDF	—	engrave	100.0%	333.3 mm/s	1	0.07 mm	Official source
Plywood	—	engrave	100.0%	250.0 mm/s	1	0.1 mm	Official source
Pine	—	engrave	100.0%	333.3 mm/s	1	0.07 mm	Official source
Paulownia	—	engrave	70.0%	333.3 mm/s	1	0.1 mm	Official source
Paperboard (Cardboard Box)	—	engrave	70.0%	333.3 mm/s	1	0.1 mm	Official source
A4 Paper (Not White)	—	engrave	15.0%	50.0 mm/s	1	0.05 mm	Official source

Sponsored · Ad space available