Ortur LU2-4 SF/LF 5.5W module Laser Settings

Name: Ortur LU2-4 SF/LF 5.5W module laser settings
Creator: MakerDial

5.5W diode · 14 official, 0 community settings

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Materials with settings

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Plywood	1.6 mm	cut	100.0%	5.0 mm/s	1	—	Official source
Plywood	2.8 mm	cut	100.0%	5.0 mm/s	1	—	Official source
MDF	3.0 mm	cut	100.0%	3.3 mm/s	4	—	Official source
Pine	3.0 mm	cut	100.0%	2.5 mm/s	1	—	Official source
MDF	5.0 mm	cut	100.0%	3.3 mm/s	10	—	Official source
Plywood	5.0 mm	cut	100.0%	1.7 mm/s	1	—	Official source
Pine	5.0 mm	cut	100.0%	1.7 mm/s	1	—	Official source
Pine	8.0 mm	cut	100.0%	1.7 mm/s	3	—	Official source
MDF	—	engrave	100.0%	166.7 mm/s	1	0.05 mm	Official source
Plywood	—	engrave	100.0%	166.7 mm/s	1	0.05 mm	Official source
Pine	—	engrave	100.0%	166.7 mm/s	1	0.05 mm	Official source
Paulownia	—	engrave	100.0%	166.7 mm/s	1	0.05 mm	Official source
Paperboard (Cardboard Box)	—	engrave	100.0%	150.0 mm/s	1	0.05 mm	Official source
A4 Paper (Not White)	—	engrave	100.0%	150.0 mm/s	1	0.05 mm	Official source

Sponsored · Ad space available