Ortur LU2-2 1.6W module Laser Settings
1.6W diode · 6 official, 0 community settings
Open Ortur LU2-2 1.6W module in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Hardwood (2 settings) · open in finder
- Paper & Cardboard (2 settings) · open in finder
- MDF (1 settings) · open in finder
- Plywood (1 settings) · open in finder
Ortur LU2-2 1.6W module settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| MDF | — | engrave | 70.0% | 50.0 mm/s | 1 | 0.07 mm | Official source |
| Plywood | — | engrave | 70.0% | 50.0 mm/s | 1 | 0.07 mm | Official source |
| Pine | — | engrave | 70.0% | 50.0 mm/s | 1 | 0.07 mm | Official source |
| Paulownia | — | engrave | 70.0% | 50.0 mm/s | 1 | 0.07 mm | Official source |
| Paperboard (Cardboard Box) | — | engrave | 100.0% | 50.0 mm/s | 1 | 0.06 mm | Official source |
| A4 Paper (Not White) | — | engrave | 60.0% | 50.0 mm/s | 1 | 0.06 mm | Official source |
Sponsored · Ad space available
Similar machines
- Ortur LU2-4 SF/LF 5.5W module (5.5W diode)
- Ortur Aufero Laser 2 10W (10W diode)
- Ortur LU2-10A 10W module (10W diode)
- Ortur Master 2 Pro S2 10W (10W diode)
- Ortur Master 3 (10W diode)
- Ortur LU3-20A/B 20W module (20W diode)