xTool F2 (15W diode + IR) Laser Settings
15W diode · 0 official, 9 community settings
Open xTool F2 (15W diode + IR) in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Leather (2 settings) · open in finder
- MDF (2 settings) · open in finder
- Acrylic (2 settings) · open in finder
- Plywood (2 settings) · open in finder
- Slate, Stone & Tile (1 settings) · open in finder
xTool F2 (15W diode + IR) settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Genuine Leather | — | cut | 80.0% | 6.7 mm/s | 2 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 100.0% | 4.2 mm/s | 3 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | cut | 100.0% | 15.0 mm/s | 3 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 95.0% | 5.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 75.0% | 33.3 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 35.0% | 25.0 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 55.0% | 41.7 mm/s | 1 | — | Community source |
| 3mm Clear Acrylic | 3.0 mm | engrave | 40.0% | 58.3 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 50.0% | 50.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available
Similar machines
- xTool D1 10W (10W diode)
- xTool D1 Pro 10W (10W diode)
- xTool D1 Pro 20W (20W diode)
- xTool F1 (10W diode + 2W IR) (10W diode + 2W infrared + 2W fiber)
- xTool M1 10W (10W diode)
- xTool M1 Ultra 20W diode (20W diode)