xTool P3 80W CO2 Plywood Settings (Cut & Engrave)
7 sourced settings for plywood on the xTool P3 80W CO2 (80W CO2), thickness 3, 6.35 mm.
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| 1/8"(3mm) Basswood Plywood | 3.0 mm | cut | 80.0% | 50.0 mm/s | 1 | — | Community source |
| Baltic birch plywood | 3 mm | cut | 90% | 30 mm/s | 1 | — | Community source |
| 1/4 in birch plywood | 6.35 mm | cut | 100% | 10 mm/s | — | — | Community source |
| 1/8"(3mm) Basswood Plywood | 3.0 mm | engrave | 6.0% | 300.0 mm/s | 1 | — | Community source |
| 1/4 in birch plywood | 6.35 mm | engrave | 20% | 500 mm/s | — | — | Community source |
| 1/8"(3mm) Basswood Plywood | 3.0 mm | engrave (fill) | 20.0% | 600.0 mm/s | 1 | — | Community source |
| 1/8"(3mm) Basswood Plywood | 3.0 mm | score (line) | 15.0% | 200.0 mm/s | 1 | — | Community source |
Sponsored · Ad space available