Creality Falcon 2 22W Paper & Cardboard Settings (Cut & Engrave)

Name: Creality Falcon 2 22W Paper & Cardboard Settings (Cut & Engrave)
Creator: MakerDial

17 sourced settings for paper & cardboard on the Creality Falcon 2 22W (22W diode), thickness 0.15, 0.2, 0.8 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Kraft paper	0.2 mm	cut	80%	66.67 mm/s	1	—	Official source
Red cardstock	0.2 mm	cut	50%	66.67 mm/s	1	—	Official source
Kraft paper	0.15 mm	engrave	18%	100.0 mm/s	1	—	Official source
Red cardstock	0.2 mm	engrave	15%	100.0 mm/s	1	—	Official source
Red felt paper	0.8 mm	engrave	13%	100.0 mm/s	1	—	Official source
Cardstock	—	cut	50.0%	66.7 mm/s	1	—	Community source
Kraft Paper	—	cut	80.0%	66.7 mm/s	1	—	Community source
Corrugated Cardboard	—	cut	38.0%	91.7 mm/s	2	—	Community source
Mylar Stencil 7.5mil	—	cut	18.0%	150.0 mm/s	1	—	Community source
Copy Paper 80gsm	—	cut	18.0%	183.3 mm/s	1	—	Community source
Cardstock 300gsm	—	cut	25.0%	150.0 mm/s	1	—	Community source
Cardboard	—	cut	60.0%	83.3 mm/s	1	—	Community source
Corrugated Cardboard	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Mylar Stencil 7.5mil	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Copy Paper 80gsm	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Cardstock 300gsm	—	engrave	15.0%	133.3 mm/s	1	—	Community source
Cardboard	—	engrave	25.0%	133.3 mm/s	1	—	Community source

Sponsored · Ad space available