Creality Falcon CR 10W Paper & Cardboard Settings (Cut & Engrave)

Name: Creality Falcon CR 10W Paper & Cardboard Settings (Cut & Engrave)
Creator: MakerDial

12 sourced settings for paper & cardboard on the Creality Falcon CR 10W (10W diode), thickness 0.2 mm.

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Settings table

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Kraft paper	0.2 mm	cut	100%	58.33 mm/s	1	—	Official source
Red card paper	0.2 mm	cut	100%	58.33 mm/s	1	—	Official source
Kraft paper	0.2 mm	engrave	25%	50.0 mm/s	1	—	Official source
Red card paper	0.2 mm	engrave	25%	50.0 mm/s	1	—	Official source
Cardstock	—	cut	100.0%	58.3 mm/s	1	—	Community source
Kraft Paper	—	cut	100.0%	58.3 mm/s	1	—	Community source
Cardstock	—	cut	22.0%	100.0 mm/s	1	—	Community source
Cardstock	—	cut	60.0%	66.7 mm/s	1	—	Community source
Cardboard	—	cut	70.0%	33.3 mm/s	2	—	Community source
Kraft Paper	—	cut	25.0%	41.7 mm/s	1	—	Community source
Cardboard	—	cut	90.0%	6.7 mm/s	1	—	Community source
Cardstock	—	engrave	20.0%	100.0 mm/s	1	0.1 mm	Community source

Sponsored · Ad space available