Glowforge Basic Slate, Stone & Tile Settings (Engrave)
9 sourced settings for slate, stone & tile on the Glowforge Basic (45W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Ceramic Tile | — | engrave | 65.0% | 180.0 mm/s | 1 | — | Community source |
| Ceramic Tile | — | engrave | 65.0% | 150.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 35.0% | 210.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 35.0% | 180.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 32.0% | 150.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 32.0% | 200.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 22.0% | 350.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 55.0% | 80.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 80.0% | 130.0 mm/s | 1 | 0.094 mm | Community source |
Sponsored · Ad space available