Glowforge Pro Slate, Stone & Tile Settings (Engrave)
11 sourced settings for slate, stone & tile on the Glowforge Pro (45W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Slate | — | engrave | 30.0% | 905 Glowforge speed mm/s | 1 | — | Community source |
| Ceramic Tile | — | engrave | 65.0% | 160.0 mm/s | 1 | — | Community source |
| Ceramic Tile | — | engrave | 65.0% | 130.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 30.0% | 250.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 30.0% | 220.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 28.0% | 200.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 28.0% | 250.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 30.0% | — | 1 | — | Community source |
| Slate | — | engrave | 80.0% | — | 1 | — | Community source |
| Marble Tile | — | engrave | 48.0% | 95.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 80.0% | 150.0 mm/s | 1 | 0.094 mm | Community source |
Sponsored · Ad space available