OMTech 80W CO2 Slate, Stone & Tile Settings (Engrave)
11 sourced settings for slate, stone & tile on the OMTech 80W CO2 (80W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Ceramic Tile | — | engrave | 55.0% | 230.0 mm/s | 1 | — | Community source |
| Ceramic Tile | — | engrave | 55.0% | 200.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 20.0% | 430.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 20.0% | 400.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 18.0% | 400.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 18.0% | 450.0 mm/s | 1 | — | Community source |
| Ceramic Tile | — | engrave | 15.0% | 300.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 10.0% | 500.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 55.0% | 66.7 mm/s | 1 | 0.1 mm | Community source |
| Ceramic Mug (Cermark coated) | — | engrave | 50.0% | 300.0 mm/s | 1 | 0.085 mm | Community source |
| Ceramic Tile (Cermark coated) | — | engrave | 55.0% | 250.0 mm/s | 1 | 0.085 mm | Community source |
Sponsored · Ad space available