OMTech 60W CO2 Slate, Stone & Tile Settings (Engrave)
10 sourced settings for slate, stone & tile on the OMTech 60W CO2 (60W CO2).
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Settings table
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Ceramic Tile | — | engrave | 65.0% | 180.0 mm/s | 1 | — | Community source |
| Ceramic Tile | — | engrave | 65.0% | 150.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 24.0% | 350.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 24.0% | 320.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 22.0% | 310.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 22.0% | 360.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 12.0% | 450.0 mm/s | 1 | — | Community source |
| Marble Tile | — | engrave | 44.0% | 108.0 mm/s | 1 | — | Community source |
| Ceramic Mug (Cermark coated) | — | engrave | 55.0% | 300.0 mm/s | 1 | 0.085 mm | Community source |
| Slate | — | engrave | 60.0% | 300.0 mm/s | 1 | 0.085 mm | Community source |
Sponsored · Ad space available