Mecpow X3 Pro 10W Laser Settings
10W diode · 0 official, 12 community settings
Open Mecpow X3 Pro 10W in the settings finder →
Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.
Materials with settings
- Leather (2 settings) · open in finder
- Plywood (2 settings) · open in finder
- MDF (2 settings) · open in finder
- Paper & Cardboard (1 settings) · open in finder
- Bamboo (1 settings) · open in finder
- Glass (1 settings) · open in finder
- Acrylic (1 settings) · open in finder
- Stainless steel (1 settings) · open in finder
- Slate, Stone & Tile (1 settings) · open in finder
Mecpow X3 Pro 10W settings (power, speed, passes)
| Material | Thick | Job | Power | Speed | Passes | Interval | Source |
|---|---|---|---|---|---|---|---|
| Cardboard | — | cut | 100.0% | 41.7 mm/s | 1 | — | Community source |
| Genuine Leather | — | cut | 100.0% | 33.3 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | cut | 95.0% | 2.5 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | cut | 100.0% | 2.5 mm/s | 4 | — | Community source |
| Bamboo | — | engrave | 100.0% | 83.3 mm/s | 1 | — | Community source |
| Genuine Leather | — | engrave | 100.0% | 75.0 mm/s | 1 | — | Community source |
| Glass | — | engrave | 100.0% | 20.0 mm/s | 1 | — | Community source |
| Acrylic | — | engrave | 100.0% | 41.7 mm/s | 1 | — | Community source |
| Stainless Steel | — | engrave | 100.0% | 10.0 mm/s | 1 | — | Community source |
| Slate | — | engrave | 75.0% | 22.5 mm/s | 1 | — | Community source |
| 3mm Basswood Plywood | 3.0 mm | engrave | 50.0% | 33.3 mm/s | 1 | — | Community source |
| 3mm MDF | 3.0 mm | engrave | 55.0% | 28.3 mm/s | 1 | — | Community source |
Sponsored · Ad space available
Similar machines
- Mecpow X4 Pro 22W (22W diode)
- Mecpow X5 22W (22W diode)
- AtomStack A10 Pro 10W (10W diode)
- AtomStack A10 Pro V2 (10W diode)
- AtomStack A5 Pro 10W (10W diode)
- Bambu Lab Module 10W (10W diode)