AtomStack A10 Pro 10W Laser Settings

Name: AtomStack A10 Pro 10W laser settings
Creator: MakerDial

10W diode · 0 official, 26 community settings

Starting points only — always test on scrap first. Every number links to its source. Community rows are user-reported and unverified.

Materials with settings

Material	Thick	Job	Power	Speed	Passes	Interval	Source
Pine	—	cut	80.0%	1.7 mm/s	10	—	Community source
Pine	—	cut	100.0%	6.7 mm/s	10	—	Community source
Basswood	—	cut	80.0%	2.2 mm/s	10	—	Community source
Basswood	—	cut	80.0%	11.7 mm/s	10	—	Community source
Bamboo	—	cut	80.0%	2.5 mm/s	1	—	Community source
Acrylic	—	cut	80.0%	2.2 mm/s	10	—	Community source
Acrylic	—	cut	80.0%	1.3 mm/s	1	—	Community source
Genuine Leather	—	cut	80.0%	3.3 mm/s	1	—	Community source
Balsa Wood	—	cut	100.0%	41.7 mm/s	3	—	Community source
3mm MDF	3.0 mm	cut	100.0%	4.2 mm/s	4	—	Community source
3mm Basswood Plywood	3.0 mm	cut	95.0%	5.0 mm/s	2	—	Community source
Glass	—	engrave	60.0%	6.7 mm/s	1	0.1 mm	Community source
Denim Fabric	—	engrave	70.0%	100.0 mm/s	1	0.1 mm	Community source
Cardboard	—	engrave	60.0%	83.3 mm/s	1	0.1 mm	Community source
MDF	—	engrave	20.0%	100.0 mm/s	1	0.08 mm	Community source
Rubber	—	engrave	70.0%	16.7 mm/s	1	0.1 mm	Community source
Basswood	—	engrave	70.0%	100.0 mm/s	1	0.1 mm	Community source
Bamboo	—	engrave	70.0%	100.0 mm/s	1	0.1 mm	Community source
Ceramic Tile	—	engrave	80.0%	8.3 mm/s	1	0.1 mm	Community source
Kraft Paper	—	engrave	60.0%	100.0 mm/s	1	0.1 mm	Community source
Paper	—	engrave	30.0%	50.0 mm/s	1	0.08 mm	Community source
Genuine Leather	—	engrave	80.0%	133.3 mm/s	1	0.1 mm	Community source
Stainless Steel	—	engrave	80.0%	5.0 mm/s	1	0.08 mm	Community source
Slate	—	engrave	68.0%	41.7 mm/s	1	—	Community source
3mm MDF	3.0 mm	engrave	45.0%	33.3 mm/s	1	—	Community source
3mm Basswood Plywood	3.0 mm	engrave	55.0%	58.3 mm/s	1	—	Community source

Sponsored · Ad space available